A solar racking configurator lets mounting manufacturers and installers turn roof or ground mount type, panel dimensions, tilt, and wind and snow loads into an engineered rail-and-clamp layout with an exact bill of materials. Stop hand-counting clamps and stop quoting systems that fail load calcs.
Load, layout, and hardware solved as you configure
Choose flush, tilt-up, or ballasted roof mount, or fixed-tilt ground mount, and the configurator loads the right rails, supports, and attachments for that system.
Enter module length, width, and frame thickness, and clamp selection, rail spacing, and row layout adjust to fit the exact panel being installed.
Set the array tilt and the tool sizes legs, struts, and front-to-back spacing while accounting for inter-row shading and overall height.
Input wind speed, exposure, and ground snow load and the configurator applies code to set rail spans, attachment spacing, and ballast or anchoring.
Rails, mid and end clamps, splices, and grounding are selected and counted precisely from the array layout, with no manual takeoff required.
Select driven pile, ground screw, or concrete for ground mount, or shingle, standing seam, and membrane attachments for roofs, matched to the surface.
Engineered layouts and exact BOMs, fast
Generate an engineered racking layout and quote during the design call instead of routing every project to an engineer.
Wind and snow logic ensures the spans, spacing, and ballast you quote actually pass site-specific load requirements.
Every rail, clamp, splice, and fastener is counted from the layout, eliminating job-site shortages and over-ordering.
Let installers configure their own systems with an online product builder that always produces valid hardware lists.
Connect racking configuration to your systems
Solar racking is a perfect product configurator use case, and pairing it with CPQ software turns engineered layouts into closed deals.
See how Ignitionary turns mount type, panel size, tilt, and load into an engineered layout and exact BOM.